Innovation R&D Leader Specialize in design and manufacture of primary and secondary Slitter & Rewinder machine, CPP | CPE Casting Film line Machine and Extrusion Laminating Coating Machinery in China Since 1998.
Cutting machine is a kind of wide paper, mica tape or thin film materials, machinery and equipment, cutting into multiple narrow cutting machine often use in paper making machinery, wire and cable mica tape and printing and packaging machinery industry.
We use cutting machine in operating, everyone should know the operation cutting machine how to operate?
Cutting machine operation process is as follows: cutting machine operation process, 1, open electrical isolation switch (boot
Set up in front of the electric control cabinet)
, according TO EMERCENCY STOP RESET and READY TO RUN button, keys TO open the MACHINE TO RUN (
The main operating platform)
Check the voltage (
Correct, current, stable;
2, open the power switch (hydraulic system
Set in the main hydraulic drive rack)
, check the oil level and the main hydraulic system pressure gauge shows is correct and stable;
3, turn the air shut off valve (
Set up under the pneumatic control cabinet on the inlet pipe)
, check the air pressure is correct (
Not less than 6.
Cutting machine operation process, setting control 1, according to cutting single arrangement of film type, thickness, length, width and so on cutting and menu Settings;
2, from the PDF file of the corresponding BOPP film archives;
3, set up corresponding specification film winding length and width;
4, choose corresponding winding station, adjust and roller roller arm, set up corresponding specifications of the paper core.
Cutting machine operation process of four, feeding, membrane and membrane 1, feeding: according to the cutting plan order requirements, in accordance with the operating rules of driving, in aging mother hanging take corresponding volume, according to the inside and outside corona surface choice direction on rolling rack cutting machine;
2, wear film: when cutting machine without membrane, must wear membrane.
3, connect a film: when cutting machine have membrane, change of the assembly, the volume using vacuum membrane machine, film machine start to work position, first artificial roll slitting machine a traction on the upper film flattening and start the vacuum pump membrane.
Cutting machine operation process, four boot operation specifications, is good to inside and outside the winding arm for paper core, the roller is in a state of running to inform all staff leave machine, ready to run;
The main ANTI - the head table
STAIC BARS on AUTO, READY TO RUN opening, start the MACHINE RUN boot operation.
We use cutting machine in operating, we should all be carried out in accordance with the above process to operation, according to the correct operation process operation cutting machine that we all need to do.
Innovation R&D Leader Specialize in design and manufacture of primary and secondary Slitter & Rewinder machine, CPP | CPE Casting Film line and Extrusion Laminating Coating Machinery in China Since 1998.