Innovation R&D Leader Specialize in design and manufacture of primary and secondary Slitter & Rewinder machine, CPP | CPE Casting Film line Machine and Extrusion Laminating Coating Machinery in China Since 1998.

The cutting and rewinding machine common problems and solutions

by:Sunny     2020-05-20
The cutting and rewinding machine is one of the important equipment, paper products processing industry paper manufacturers to use this equipment almost every day, if there is a fault will cause the production process, factory will have a loss. In general, if you don't pay attention to daily maintenance staff at ordinary times, the cutting and rewinding machine will often appear some problems, in order to bring the occasional small problems timely, we summarized the following problems more often for your reference, hope to be of help: first, the cutting and rewinding receive a volume. This is mostly due to the paper core is not applicable, meets the requirements should be replaced inside diameter of paper core, used in the process of winding winding roller, also can avoid cutting and receive a volume. Second, cutting and winding materials up trend. The main winding tension is incorrect, adjust the paper cutting machine suitable winding tension, winding roller to be used and will be cutting material package overvoltage roll before entering the winding paper core. Third, the meter counter is not allowed. Round the problem, the meter can be double contact feed roller at the same time, and do a marker on meter wheel hand five laps to number 1 meter or replacement of the meter. This is staff usually is very difficult to operate the cutting and rewinding machine, in order to quickly solve will remember these points, there may be other new problems, whether rewinding machine or napkin machine, can consult these paper machinery manufacturers, professional and technical personnel to help solve.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...